Queensland security OSD High Speed Dome Camera Installation Manual download pdf (Page 17)

Installation Guide

Switch No. Protocol Baud Rate

VCL 9600

Pelco D 2400

Pelco P 4800

Chiper 9600

Philips 9600

DSCP 9600

AD422 4800

DM P 9600

Pelco D 4800

Pelco D 9600

Pelco P 2400

Pelco P 9600

JVC 9600

Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance,

the protocol switch should be set as below.

Decimal Digit Single Digit

NOTE: The number “0” should locate upwards as shown in the

diagram above for correct switch definition.

3.4 Dome Cable Definition and Requirements

For operation, the integrated dome camera requires the video cable to carry

the video signals to the remote viewing site, power cable to power the dome

and RS485 data cable to carry commands from the control device.

3.4.1 Cable Requirements

For operation, the integrated high speed dome cameras require video and

data cables as described below:

• The video cable sends video signals to a remote viewing site. Using a

coaxial cable to send video signals is recommended.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

No comments

Queensland security OSD High Speed Dome Camera Installation Manual Page 17